1. High quality.
2. This controller controls the wind turbine to automatically charge the battery.
3. When the battery is full, the fan is slowed down by the internal automatic circuit. When the battery voltage drops to the recovery voltage, the fan recharges the battery, protecting the fan and battery.
4. The rectifier and brake circuit part of the controller adopts an integrated module design.
5. Fully waterproof protection, fully waterproof and fully waterproof, with protection level above IP67
Specification:
Features:
1. High quality. This controller controls the wind turbine to automatically charge the battery.
2. When the battery is full, the fan is slowed down by the internal automatic circuit. When the battery voltage drops to the recovery voltage, the fan recharges the battery, protecting the fan and battery.
3. The rectifier and brake circuit part of the controller adopts an integrated module design.
4. Fully waterproof protection, fully waterproof and fully waterproof, with protection level above IP67.
Specification:
Condition: 100% Brand New
Model: FW12/24.
Battery rated voltage: 12/24 V. Rated power wind turbine: 300 W/600 W. Brake start voltage (factory setting): 14.4 V/28.8 V. Brake recovery voltage (factory setting): 13.2 V/26.4 V.
Display mode: LED (light emitting diode display).
Working temperature and humidity range: -35°C to +75°C.
Quiescent current: ≤15 mA.
Protection level: IP67.
Weight: approx. 255 g / 9.0 oz.
Size: approx. 100 x 87 x 28 mm / 3.9 x 3.4 x 1.1 inches.
Wiring:
1. Connect the positive and negative terminals of the battery to the plus (red) and negative poles (black) of the battery.
2. Connect the three-phase output voltage of the wind turbine to the three-phase input terminal (green