Features:
The module can convert the 5V input signal into a 24V signal or the input signal with 24V into a 5V signal. It can also convert a signal from 5V to 5V or 24V to 24V level and isolate the input signal and output signal via an optocoupler, which can improve the anti-interference ability of the circuit. The input level can be adjusted via the DIP switch. The 24V output is NPN OC output, the output current is 100mA. It has conversion and gain circuit, good wave, strong control ability. Compatible with a common cathode or common anode input connection that meets European and Japanese PLC interface standards. Compatible with the AC/DC input power supply interface, designed with mains indicator light. When the output is set to 24V, it is NPN OC output with a maximum charging capacity of 1A. 24V output is OC output (NPN collector idle output). If you want to test the output, it must add a resistor, usually a 10KR resistor. When converting the signal to the 24V level, the input voltage supply should be 24V. When converting the signal to a 5V level, the input voltage can be between 7V and 35V. You can use 4 pieces M3 spacers (not included) to install it.
Specification:
Model: 8-5V24V.
Channel: 8 channel.
Input: NPN or PNP, 5V or 24V rectangular wave signal
Output: NPN 5V or 24V rectangular signal
Size: approx. 10.3 x 7.3 x 3 cm / 4.1 x 2.9 x 1.2 inches.
Approximate weight 100 g / 3.5 oz.
Package list:
1 x level converter