Feature

●Audison APBMW S8-2 Underseat Subwoofer for BMW E-Series & F-Series Subwoofer for BMW Models
●20cm Undersea Subwoofer
●Subwoofers have been developed using electro-acoustic parameters that maximize the performance of factory box available below the seats. The fibreglass reinforced ABS plastic basket and the acoustic structure with a front magnet ensure a minimum installation depth for perfect compatibility with the entire range. Two included 5mm polyurethane seals allow for optimal adaptation of the subwoofer to the box and decouple it from vibrations.
●The 200 mm (8 inch) APBMW S subwoofers allow a direct replacement of the OEM speakers under the front seats, maximizing the acoustic stress of the factory and creating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance to improve system composition versatility. In the middle-high configuration with passive filtered system,
●with the intended crossover, 4 of the 8 channels of the AP 8.9 bits can be configured in bridge mode and deliver 130W effective value to any S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the output of the AP 8.9 bit at 2 ohms and using additional 2 channels for the rear system. The neodymium magnet used on S8-4 and S8-2 allows higher power and control than ferri


Description

Audison APBMW S8-4, 20 cm subwoofer for BMW MINI.

The subwoofers have been developed with electro-acoustic parameters that maximise the performance of the box placed by the factory below the seats. The fibreglass reinforced ABS plastic basket and the structure specially adapted to the acoustics with a front magnet ensure a minimum installation depth while maintaining perfect compatibility with the overall picture. Two included 5 mm polyurethane seals allow optimal adjustment of the subwoofer to the box and dampen the vibrations.
The 200 mm (8 inch) APBMW S subwoofers allow direct replacement of the OEM speakers under the front seats, increasing the acoustic power from the factory and generating low and crisp frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance to improve system composition versatility. In the mid-high configuration with passive filtered system, with the intended crossover, 4 of the 8 channels of the AP 8.9 bits can be configured in bridge mode and deliver 130W rms to any S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the performance of the AP 8.9 bits at 2 ohms and providing an additional 2 channels for the rear system. The neodymium magnet used on the S8-4 and S8-2 allows higher power and control than ferrite, while the mounting depth remains unchanged.


ComponentWooferSizemm (in.) 200 (8)Power HandlingW peak
W continuos300
150ImpedanceO4Frequency ResponseHz35 ÷ 500Magnet size D x d x hmm
(in.) 48 (1.89) x 18 (0.71) x 7 (0.28)Weight of one speakerkg (lb.) 1.21 (2.67) Voice coil diameter mm (in.) 50 (2)