The myEthernet with the ATmega1284P . - Extremely compact and fast network solution for the implementation of an embedded web server - Monitoring and controlling over network enables - Web design via HTML on a MicroSD card Equipment: - 10 MegaBit Ethernet with ENC28J60 from Microchip - ATmega1284P 20 MHz with pre-installed web server - IP address, port, and a lot more configurable - 128 K FLASH - 16 K byte SRAM - 4 K byte EEPROM - MicroSD card holder - Ethernet jack with transformer - ISP connector 10pin - TWI / UART / SPI interface - up to 22 digital I/O - 8 analogue inputs - 2 PWM outputs - expansion socket according to myAV. Rstundard - Quality printed circuit board FR4, industrial production, robust Features: - Extremely compact network solution for the realization of an embedded web server - Measurement data can be visualized via a browser and controlled and regulated via myEthernet - Size: only 90 x 30 x 15 mm - Module has its own Mac address - Possibilities of use: - As an interface between a microcontroller and the network - Takeover of the measuring and Control tasks - module can be reached in the network via IP address - save and access websites or user interfaces on the myEthernet => To ensure remote maintenance of systems (e.g. via a web interface) possible use of the myEthernet module: - as an add-on to the myAVR boards - individually - expandable with an autonomous power supply - pre-installed firmware, can manage SD cards with a FAT file system up to 2 GB - external power supply recommended (e.g. PowerKit V5) to avoid errors when operating with the MicroSD Card Error - MicroSD Card: included, presented with trilingual websites (German, English, French; contain description for the myEthernet, configuration of the myEthernet, application examples, etc. Scope of delivery: - myEthernet 128K, pre-assembled - Pin header and female header individually (not soldered, intended for installation in other target systems or with myAVR products) - MicroSD card (pre-played) Note: The myEthernet can also be installed in other target systems or combined with other myAVR products. This requires the pin header and socket header Both are included, but not soldered.