90 pieces of heat-conducting silicone pads: 67 x 20 mm silicone thermal pad, thick 0.5/1/1.5 mm thermal pad, reusable heat-conductive silicone pads for SSD CPU GPU LED IC chipset cooling
Widely used:
Replaces the conventional grease paste from heat sink, which is suitable for control board, motor, electronics, CPU, GPU, heat sink, power LED, car mechanics, computer host, laptop, DVD, VCD, LID, set top box, LED IC and all other cooling modules.
Good performance:
Electrical insulation, at -40 degrees Celsius - 200 degrees Celsius will not melt, wear-resistant, anti-static, fire retardant, buffering, reliable, odorless, no corrosion, no stimulation, no damage to metal materials.
Specification:
Material: silicone.
Colour: blue.
Temperature resistance: -40°C to +200°C.
Dimensions: 67 x 20 mm.
Thickness: 0.5 mm / 1 mm / 1.5 mm.
Package includes:
Pack of 30 100 x 100 x 0.5 mm thermal pads.
Pack of 30 100 x 100 x 1.0 mm thermal pads.
Pack of 30 100 x 100 x 1.5 mm thermal pads.
Application:
1. Remove the old heat-conducting products from the radiator and clean the surface of dirt.
2. Determine the contact position of the chip and the cooler on the radiator and cut the appropriate size.
3. Peel off the protective film on one side of the conductive film. Stick them to the fixed position of the radiator.
4. And then tear off the other side of the protective film. After installing on the radiator, apply a certain pressure to bring it close to the surface of the cooler.