Feature(may vary by option.)

●This compact mass separator filter offers galvanically isolated inputs and outputs in the form of 2 RCA sockets and 2 RCA connectors, eliminating 50Hz hum
●With the device, sigl interference and hum loops can be avoided, which can occur when connecting PC sound cards or notebooks to amplifiers, for example
●With an input/output impedance of 20 kΩ, a frequency range of 20-30,000 Hz and a distortion factor of less than 0.01%, the device is also easy to use in the professional hi-fi range
●Ground loops can also occur if two devices e.g. via the power supply or a conductive connection of the housing, thanks to the 2 channel audio transformer a galvanic isolation is achieved here
●The suppressor is developed for indoor use, protected against drip waistband splashes of water as well as high humidity and heat. In addition, it offers a transmission ratio of 1 1 and has a length including the connection cable of approx. 40 cm (order no. 21.3050)
●The FGA-40MF transformer is required when multiple audio devices are connected

[Bundle with sheath current filter]

[Single]

[Bundle with audio ground separator]

[Bundle with NF suppression filter]

Description

Ground separator filter in small design, to avoid signal interference and hum loops, which can occur e.g. when connecting PC sound cards or notebooks to amplifiers.

• Galvanically separated inputs and outputs.
• 2 RCA sockets
• 2 RCA plugs
• Input/output impedance: 20 kΩ.
• Frequency range: 20-20,000 Hz.
• Harmonic Distortion <0.01%
• Transmission ratio 1:1
• Diameter 24 mm x 38 mm.
• Weight: 32g
• Length: including connection cable approx. 40 cm