Description
DC 12V 55rpm 8.5kg cm self-locking worm gear motor with encoder and cable, high torque speed reduction motor
Specification:
Voltage: DC 12V
Idle speed: 55 rpm.
Reduction ratio: 1:72.
Torque: 8.5kg cm
Error: ± 10%.
Wire length: 20 cm.
- Shaft diameter 8 mm type D.
- Shaft length: approx. 15mm
Total size (without shank): 40 x 36 x 125 mm.
Connection cable:
Note:
1. The yellow and green cables are the speedometer signal line, and you cannot connect a power supply, or it will be burned.
2. Positive and negative power supply of encoders must not connect incorrectly; voltage is 3.3-5V
3. Control of CW and CCW motor by using the positive and negative power supply of encoder (red wire and white wire, connect).
Red wire - Positive power supply from motor (+)
White Cable - Negative Power from Motor (-)
Black wire: negative power supply encoders (-) (positive and negative power supply from encoder must not connect incorrectly; voltage is3.3-5V)
Blue wire - Positive power supply of encoder (+) positive and negative power supply of encoder must not connect incorrectly; voltage is 3.3-5V
Yellow Wire - Signal Feedback (11 signals per motor makes from a circle)
Green Wire - Signal Feedback (11 signals per motor makes from a circle)
Package includes:
1 x motor, 1 x IP65 connector