Feature

●Made of high speed steel, durable and rustproof. Specially made for Tocket-Screw Joinery Suitable for drilling wood of different hardness and leaving perfect holes
●Drill the guide for pocket holes and work well with the manual pocket hole jig master system. A good helper for DIY woodworking
●Shank Type: 3/8" Round Shank and 1/4" Hex Shank. Diameter: both are 9.5 mm. Inner diameter of the positioning ring: 9.5 mm
●Used for punching and positioning wood holes, punching aluminum, punching thin metals, etc. Used.
●Package includes: 2 x pocket hole jig drills, 2 x positioning ring, 2 x wrenches, meet different requirements


Description

Specification:

►Material: HSS

► Shank Type:Round Shank and 1/4 inch Hex Shank

►Shank Size:9.5mm

►Inner diameter of positioning ring: 9.5mm

► Tip Diameter: 4mm

►Total length: 160mm

Description:

► 2 x Pocket Hole Jig System Drill Bits including round shank and 1/4" hex shank.

► Works with standard 3/8" diameter drill chucks

► Small tip with screw shank hole

► Large diameter creates a flat bottom hole.

► Bits with 9.5 mm diameter down to approx. 4mm

► Comes with wrench and limit ring.

►High strength and hardness, durable in use.

► Perfect for use with pocket hole guides

Application:

1. Adjust the height of the drill.

2. Clipboard you want to drill.

3. Put the drill into the hole in the wood.

4. Drill up to 5 mm (do not think to drill against the wood).

5. Start the drill reaches a certain speed above 500 RPM, 1500 RPM is the best.

6. Advanced slowdown, e.g. For example, front fine drills, half or full drilling, then the speed can accelerate.

Package includes:

2 x Step Drill Bit (Round Shank and 1/4" Hex Shank)

2 x Stop Collar

2 x Wrenches