Feature

●ProClip vehicle holder 805589 suitable for: Volkswagen T6.1 Transporter/Pickup 20-21. Mounting position: left mounting for left-hand drive vehicles suitable for all Brodit device holders
●Box contents: Brodit ProClip 805589 suitable for your vehicle; pilot holes (AMPS hole size) suitable for Brodit device holders for easy installation Brodit "gap opener" as an aid for installation in e.g. The dashboard does not damage it. NOTE: The 4 mounting screws for connection between the ProClip and the device holder are included in the box contents. The Brodit ProClip is a mounting platform that you install in your vehicle. You can attach a Brodit holder to the ProClip which is suitable for your smartphone, PDA, tablet etc. With the Brodit ProClip car holder, you always have a clear view, because it is not placed on the windscreen, but on the dashboard – precisely for the respective vehicle type. Installation of the ProClip takes only one minute. No special tools are required. No need to drill holes in the vehicle fitting. The Brodit ProClip is the basis for all Brodit device holders. Brodit device holders are available active (with charging function) and passive (without charging function).
●The Brodit device holders are available for Apple devices such as iPhones or iPad mini or Android smartphones and tablets such as Huawei P20 or Samsung Galaxy S10. Brodit device holders are available active (with charging function) and passive (without charging function).
●Installation of the ProClip takes only one minute. No special tools are required. No need to drill holes in the vehicle fitting. With the Brodit ProClip vehicle holder, you always have a clear view, because it is not placed on the windscreen, but on the dashboard - and precisely for the respective vehicle type. No unsafe attachments such as on ventilation, air vents or magnets
●Box contents: Brodit ProClip suitable for your vehicle; pre-drilled holes (AMPS hole size) suitable for Brodit device holders for easy installation; Brodit "gap opener" as an aid for installation in e.g. Dashboard without damaging it; Note: 4 mounting screws for connection to Brodit device holders are included in the box contents; all components of the highest quality from Europe! Made in Sweden
●Compatible phone models: suitable for: Volkswagen T6.1 Transporter/Pickup 20-21


Description

class="celwidget" data-feature-name="aplus" data-csa-c-type="widget" data-csa-c-content-id="aplus" data-csa-c-slot-id="aplus_feature_div" data-csa-c-asin="" data-csa-c-is-in-initial-active-row="false" data-csa-c-id="cal18t-fvg6pj-n13uz0-q6l5lk" data-cel-widget="aplus_feature_div">

From the manufacturer

Brodit ProClip Holder for Car Smartphone Tablet Navigation Universal Holder Charging USB QiBrodit ProClip Holder for Car Smartphone Tablet Navigation Universal Holder Charging USB Qi
ProClip Vehicle Holder 805589 for VW T6.1 Transporter 20-21, VW T6.1 Pickup 20-22ProClip Vehicle Holder 805589 for VW T6.1 Transporter 20-21, VW T6.1 Pickup 20-22

ProClip vehicle holder 805589 – left mounting – Volkswagen T6.1 transporter/pickup 20-21, Volkswagen T6.1 transporter/pickup 20-22

Mounting Position: Left-hand mounting for left-hand drive vehicles

Installation of the ProClip takes only one minute. No special tools are required. No need to drill holes in the vehicle fitting. With the Brodit ProClip vehicle holder, you always have a clear view, because it is not placed on the windscreen, but on the dashboard - precisely fitting the respective vehicle type. No unsafe attachments such as air vents, air vents or through magnets

Please read the instructions carefully and view the pictures before installation. It is important to install the ProClip first: Bracket/equipment must be fitted after the ProClip sits in place. It is recommended to install the ProClip on the position shown in the pictures.

Mounting of the ProClip

Brodit ProClip Vehicle Holder 805589 Assembly Step 1Brodit ProClip Vehicle Holder 805589 Assembly Step 1

Brodit ProClip Vehicle Holder 805589 Assembly Step 2Brodit ProClip Vehicle Holder 805589 Assembly Step 2

Brodit ProClip Vehicle Holder 805589 Assembly Step 3Brodit ProClip Vehicle Holder 805589 Assembly Step 3

Brodit ProClip Vehicle Holder 805589 Assembly Step 4Brodit ProClip Vehicle Holder 805589 Assembly Step 4

Step 1:

Clean the surface where the ProClip is to be mounted with the included alcohol pad. Remove the protective film from the adhesive strip on the ProClip. Hook the grooved edge at the bottom of the ProClip over the frame around the ventilation grille,

Step 2

Push the ProClip forward and hook the grooved edge at the top under the frame around the ventilation grille.

Step 3

Here, as described in steps 1 and 2, the grooved edges at the bottom and top end are hooked under the frame around the ventilation grille.

Step 4

The ProClip is mounted.

The Brodit solution

Brodit device holderBrodit device holder

Brodit ProClip Vehicle HolderBrodit ProClip Vehicle Holder

Brodit device holder and vehicle holder mounted on the dashboardBrodit device holder and vehicle holder mounted on the dashboard

Device holder - suitable for your device

Our device mounts are specially designed for your smartphone, navigation device as well as other mobile devices. The smartphone holders can be used for smartphones with or without a case or case and can be charged wirelessly or with charging cable.

ProClip vehicle holder - suitable for your vehicle

The ProClip is vehicle specific, it is adapted to fit any vehicle model and has a perfect fit. The ProClip provides a fixed mounting platform and is available for mounting in different positions for most vehicles. Inconspicuous design that blends well into the interior. Safe, clean and practical!

The Brodit solution: Device holder and vehicle holder

With the combination of Brodit vehicle and device holders, you always have a clear view, because it is not placed on the windscreen, but on the dashboard - easy installation, without special tools

Product information