Universal
The fan adapter is a universal mount and suitable for standard ventilations. The air vents must run horizontally or vertically. The system is usually not suitable for round ventilation nozzles. For vertical systems, the two brackets can be rotated 90°. (Slide in the middle, twist and push back).
For installation, gently attach the two upper clamps to a ventilation slat and press it towards the ventilation (so that the slat does not fold over, fix it with your free hand). Due to the pressure, the clamps spread and automatically close again as soon as they are behind the slat. Now slide the two U-shaped "grid nose", each on a clamp towards the ventilation. Thanks to the short-graduated grid, the adapter locks and stabilises itself.
Our cup holder is designed to not fall out. Please note: If you want to remove the holder from the air vent then do not simply pull it away. You need to carefully spread the ventilation clips and then pull them out as shown below. Otherwise, your vehicle could be damaged.
1. Before you want to release the holder from the ventilation, hold the holder firmly with one hand without pulling it.
2. Use a screwdriver to gently spread the clips for ventilation.
3. Once the two hooks are free, gently pull out the holder.
Premiumqualität zu einem günstigen Preis. Ein sicheres Einkaufserlebnis, schnell geliefert nach Hause.