Feature
●Compact table model
●Variable speed control from 11500 to 24000 min-1
●Collets of diameter 6, 8 and 12 mm
●Powerful 1500 watt motor
●Standard with angle stop and large aluminium stops
●Double-sided table extensions, table size 610 x 360 mm
●Adjustable spindle height from 0 to 40 mm
Description
Product description
The compact PX-TFM-40 wood milling machine from Practixx is a practical table model that can also be used on the go if required. The table milling machine gets a firm stand thanks to its sturdy construction and the weight of almost 21 kg. Thanks to the double-sided table extensions, the compressed milling machine offers a pleasantly large surface for working.
Table milling machines are often used in the hobby workshop, for example, for making slots, grooves or other cut-outs. The PX-TFM-40 from Practixx is a practical and compact table model that can even be used on the go if required.
Highlights
- Compact table model
- Variable speed control from 11500 to 24000 min-1
- Collets of diameter 6, 8 and 12 mm
- Powerful 1500 watt motor
- Standard with angle stop and large aluminium stops
- Double-sided table extensions, table size 610 x 360 mm
- Adjustable spindle height from 0 to 40 mm
|
|
|
|
|---|---|---|
|
The PX-TFM-40 is suitable for the use of cutters up to a diameter of maximum 50 mm. The sturdy construction and a weight of almost 21 kg ensure a particularly stable and secure stand of the wood cutter. Thanks to the variable speed control from 11500 to 24000 revolutions per minute, the workpiece can be optimally machined. The 1500 W motor also ensures sufficient power. |
The spindle height and thus the height of the milling blade is easily adjusted by turning on a hand crank on the side of the machine. The desired height can be freely adjusted from 0-40 mm and is then fixed with a clamping screw. For attaching the workpieces to the milling table, three clamping devices with 6, 8 and 12 mm are included, allowing good guidance and safe handling. |
With a table size of 610 x 360 mm, the wood milling machine can also be placed in small workshops. The integrated table wideners on both sides additionally increase the table surface and thus also allow you to easily work on large workpieces as well as to perform special milling work. As standard, the PX-TFM-40 is also equipped with an angle stop and extra large aluminium stops that hold the workpiece in place. |
