Feature

●Boat depth meter with practical sensor: the working voltage is 9-32V, up to 36V, low power consumption, long service life, high accuracy, short start time, the highest depth display of 100 m, you can immediately see the water depth.
●Echo sounder material: made of stainless steel 316L bezel and anti-fog glass, it has excellent anti-fog and waterproof properties, and can be used for a long time even in cold sea environments.
●BOAT DEPTHMETER WITH TRANSDUCER FUNCTION This unit only works with a 12V system to indicate the specified depth. Usually the buzzer beeps once when connected correctly, and then turn on the device.
●Depth finder mode: press the keypad mode to switch the Sh, Dp, KL, and Un. Used to turn the monitor on or off. Short press to set the required value and keep the digital increase or decrease fluent.
●Echo sounder application: easy to install, good durability, impact resistant, flexible and easy to use, suitable for yachts, small and medium boats, fishing boats and other types of sea transportation.


Description

1. Practical: the operating voltage is 9-32V, up to 36V, low power consumption, long service life, high accuracy, short start time, the highest depth display of 100m, you can immediately see the water depth.
2. Material: made of stainless steel 316L bezel and anti-fog glass, it has excellent anti-fog and waterproof properties, and can be used for a long time even in cold marine environments.
3. Function: This unit only works with a 12V system to display the specified depth. Usually the buzzer beeps once when connected correctly, and then turn on the power supply.
4. Mode: Press the button mode to switch SH, DP, KL, UN function. Turn the monitor on and off. Short press to set the desired value, and let the digital display rise or fall fluently.
5. Application Easy to install, good durability, impact resistant, flexible and easy to use, suitable for yachts, small and medium boats, fishing boats and other types of sea transportation.

Specification:
Item type: echo sounder. Material: 316L stainless steel, anti-fog glass, ABS. Mounting hole diameter: approx. Φ52 mm/2 inches.
Depth display range: 0-100m/0-328ft.
Backlight: white.
Operating voltage: DC 12 V.
Momentary voltage: DC 9-32 V, up to 36 V.
Operating current: 60 mA.
Operating temperature: -30 °C to + 75 °C.
Storage temperature: -40°C to +85°C.
Dial water resistance: IP67.
Protection class of the back: IP5.
Operation:
A. This unit only works with a 12V system to indicate the set depth. Normally, the buzzer beeps once when it has been connected correctly, and then turn on the power supply.
B. Keypad "Mode": Short press the "Mode" keypad to switch between SH/DP/KL/UN. Press and hold the "Mode" keypad,