Feature

●Equipment: the fuel filter water separator is an outboard motor, the model is S3213, fits for Yamaha, for Honda speedboats, motor boats, etc.
●Metal + Nylon Material The fuel water separator is made of metal + nylon, which has high strength, heat resistance and long operating time.
●Excellent Function 10 micron filter cartridge efficiently removes small particles and separates water from your fuel, prevents water from rusting and oil supply systems abrasion.
●Features: The marine fuel filter can reduce the friction resistance between the relatively moving parts in the engine and reduce the wear of the parts.
●EASY OPERATION Easy to install and replace the filter cartridge when needed, convenient to use. Draining water or replacing water is determined by the degree of pollution of the fuel. Replace at least once a year or if a performance drop is detected.


Description

Specification:
Condition: 100% brand new.
Item Type:Marine Fuel Filter Water Separator
Material: metal + nylon.
Model: S3213.
Color: As picture show
Application: Outboard motor parts, fit for Yamaha, for Honda speedboats, motor boats, etc.
Length: Approx. 267 mm.
Width: approx. 102mm
Height: approx. 102mm
How to drain water:
1. Loosen the self-venting drain plug to drain the water from the bowl into a container.
2. Tighten the drain.
3. Fill the filter with fuel with an ignition capsule.
4. Start the engine and make sure there are no leaks.
How to replace:
1. Loosen the self-venting drain plug and drain it into a container.
2. Remove the filters from the mounting bracket with attached bowl.
3. Remove the bowl from the filters and clean the O-ring fitting on the bowl. Bowl is reusable, do not dispose of.
4. Lubricate the O-ring with oil or grease and place it on the bowl.
5. Install the bowl on a new one and tighten it by hand.
6. Lubricate the top filter seal with oil or grease.
7. Fill the filter/bowl assembly with clean fuel and attach to the mounting bracket. Tighten them by hand.
8. Start the engine and make sure there are no leaks.
Package list:
1 x fuel filter water separator.
2 x connectors.
2 x seals.

Note:
1. Draining water or replacing water is determined by the degree of pollution of the fuel.
2. Check the drip tray daily for water and wait as needed.
3. Replace at least once a year or