Feature

●【Self-priming water pump】: a 12 volt DC water pump with pressure switch will automatically shut off when the pressure at the water outlet is large enough, and will run again when the pressure drops


Description

This high quality DC micro diaphragm pump with pressure switch will automatically shut off when the pressure at the water outlet is large enough. And runs again when the pressure decreases. It is not a good idea to let this pump run dry for too long. This type of product can be used on occasions where energy saving and frequent switching are required, e.g. when washing machines, supplying water to a solar system and an automatic remote control system for pumping water and interrupting the water supply, etc.


Specifications:
Voltage: DC 12 V.
Power: 60 W.
Flow rate: 5 l/min
Maximum working pressure: 116 psi (0.8 MPa)
Suction height: 1.5 metres.
Pump lift: 50 metres.
Size: approx. 9.9 x 16.7 cm / 3.9 x 6.6 inches.
Cable length: approx. 29 cm / 11.4 inches.
Outer diameter of the interface: approx. 10.8 mm / 0.4 inches.
Inner diameter of the interface: approx. 6 mm / 0.2 inches.
Package weight: 688 g

Application: can be widely used for garden sprinklers, showers, faucets in boat, caravan or motorhome


Package includes:

1 x self-priming pump.


Note:

1. This is a product with return valve.

2. The motor still does not stop running, even if the water outlet is blocked, but the return valve is opened and in this situation water circulates in the pump.

3. This type of product can be used on occasions where there is a low demand for energy saving.

4. Please allow 1-3 cm error due to manual measurement. Thank you for your understanding.


5. Suitable for pipes with an inner diameter of 8 mm and an outer diameter of approx. 12mm