Feature
●Connect water inlet and outlet interface with silicone PE or PU pipe
●The mounting feet are made of rubber instead of rigid plastic, which provides pretty good vibration isolation
●Built in pressure switch, it will automatically turn on and off when you turn your faucet or nozzle on and off
●With a pressure switch, it will automatically shut off when the pressure of the water outlet is large enough. And runs again when the pressure decreases
●This type of product can be used on occasions where energy saving and frequent switching are required, such as Machine washing, feeding water into a solar energy system and automatic remote control system for conveying and hanging water
Description
Self-priming water pump
Instructions:
1. The direction with a small arrow on the water pump is the water outlet.
2. The wires are not divided into positive and negative poles.
3. The pump can be set up in any direction.
Description:
This high quality DC micro diaphragm pump with pressure switch will automatically shut off when the pressure of the water outlet is large enough. And runs again when the pressure decreases. It is not a good idea to let this pump run dry for too long. This type of product can be used on occasions where energy saving and frequent switching are required.
|
|
|
|
|---|---|---|
|
|
|
|
Specifications:
Volts: DC 12 V
Power: 60W
Flow rate: 5 l/min
Maximum working pressure: 116 psi (0.8 MPa)
Suction height: 1.5 metres
Pump lift: 50 metres
Size: Approx. 9.9 x 16.7 cm / 3.9 x 6.6 inches
Cable length: Approx. 29 cm / 11.4 inches
Outer diameter of the interface: Approx. 10.8 mm / 0.4 inches
Inner diameter of the interface: Approx. 6 mm / 0.2 inches
