Feature

●Bridge tube size: 9 mm inner diameter, 10 mm outer diameter, 64 cm length. Filling hose size: 8mm hole diameter, 26.7cm length, 26mm diameter with screw
●Material: made of polyurethane and stainless steel for durability and reliability.
●Fitment: Designed to fit Seastar hydraulic steering systems for inboard and outboard hydraulic steering, making them suitable for a variety of boats.
●Package includes: bridge tube and filling hose with screw for convenient and efficient use.
●💖Basic instructions: easy to follow steps to refill your boats steering system, including attaching to the control tank and pumping through the system to remove bubbles.


Description

Product Features:
Material: polyurethane, stainless steel.
Color: Gold Tone, Black, Clear
Inner diameter of bridge tube: 9 mm.
Bridge tube length: 64 cm.
Bridge Tube Outer Diameter: 10mm
Thread size filling hose: 1/4 NPT
Filling hose hole diameter: 8 mm.
Filling hose length: 26.25 inches.
Screw diameter filling hose. 26mm
Filling hose with screw outer diameter: 12 mm.
Suitable for:
Fits Seastar Inboard Hydraulic Steering Systems For refilling the steering system of your boat.
Basic Notes:
1. Attaches to helmet container (do not pierce (do not run empty).
2. Connect bridge pipe to fittings on the steering cylinder and loosen fittings.
3. Use the helmet to pump through the system by turning the wheel towards it. Bubbles are pressed into the reservoir at the rudder.
4. Manually pivoting outboard through full joints to relieve trapped objects.
5. Note: The alignment of the fittings when pumping with the helmet allows the cylinder to escape.
6. Repeat 3-4 times until none is visible in the bridge tube.
7. Tighten the fittings before removing the bridge pipe.
Package includes:
1 x Bridge Tube
1 x filling hose with screw