Feature
●Dynamic Scan Start: Automatic dynamic scan effect when starting the car and then constant lighting mode (as shown in the video). The dynamic scan start up hoodbeam kit has double-sided adhesive that is easy to peel and stick. The red cable is connected to the ACC insurance, the black cable is connected to the negative pole. The LED car hood light strip turns on immediately when the car is started
●Bright car light LED beads: Yeelan LED for car use high-quality 5050 LED beads, which are super bright. They have fast heat dissipation and a long service life. The LED strip car LED beads have no graininess, the entire light radiates soft. Yeelan LED daytime running light with fashionable dynamic scan start-up run-through design make your car unique
●Safety protection and safe driving: the LED bar car is about 180 cm long. The operating voltage is 10-16V (suitable for 12V cars). A safe, eye-catching white appearance is noticed when driving when the environment is dark or in bad weather. It is also a good warning light on a rainy foggy day. Short circuit protection increases safety
●IP68 Waterproof & DIY Cut:Dynamic start-up hood radiation kits are made of high quality soft silicone material, which is waterproof and dustproof, and not easily damaged in the rain and winter. The non-heating elastic material can be easily bent. The length of the car lights can be cut by the black mark on the light. (Tip: cutting is not recommended as the scan point is not centered after cutting)
●Wide applications: this decorative light bar for outdoor use is suitable for 12V vehicles and can be widely used in cars, SUVs, trucks, etc. If you have any questions, please feel free to contact us. Our customer service team will reply you within 24 hours
Description
Yeelan Dynamic Scan Start Up Hoodbeam Kit, Decorative Light Bar
YEELAN LED daytime running light with fashionable lighting design that will keep you ahead of all other cars on the road. Improve the style of your car and make it more attractive and cool. Features: Car hood LED strip lights use high quality 5050 LED beads and are very bright. Dynamic car hood LED strips are made of high quality soft silicone material, which is waterproof and dustproof. LED beads without grain, all the light emits soft light. Application: Daytime running light, car hood light, car ambient light.
LED lights for car installation
How are the wires connected? The black wire is connected to the negative pole + the red wire is connected to ACC = the car starts to light up. The black wire is connected to the negative pole + the red wire is connected to DRL = turn on DRL to illuminate it. Note: Please connect the red wire with a fuse, not directly to the battery. When you turn off the car, the ACC fuse is cut off, then the light goes off.
|
|
|
|
|
|---|---|---|---|
Fuse protectionShort circuit protection to increase safety. Product parameters: voltage: DC12VLower: 5W. Material: SiliconeLength: 180 cm |
Can be cut by yourself (not recommended)The non-heating elastic material can be easily bent. The length of the car hood light can be shortened using the black mark on the light. (Note: Cutting is not recommended, the scan point is not centered after cutting.) |
Strong adhesiveDynamic scan start up hoodbeam kit with double-sided tape, easy to peel and attach. Only one side needs to be torn off when installing. It can be connected to the car without changing the wiring. |
Super bright LED beadHigh brightness LED beads without grain, the brightness is much higher than other ordinary lamps. |
