Specification:
Condition: 100% Brand New
Item Type:Daytime Running Light Controller
Material: ABS
Color: As picture show
Voltage: 12-18V.
Operating current: 3A.
Package list:
1 x Daytime Running Light Controller
The product contents:
1. The starting voltage is 13V+ and the flame breakout voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes until the voltage is reached.) 2. 1 pair of daytime running lights total power no more than 18W (most daytime running lights will not exceed the total power)
Wiring instructions:
1. First connect the plus and minus side of the daytime running light left and right, and connect the minus poles first.
2. Connect the red and black wires of the input to the fuse on the controller to illuminate the positive and negative pole of the battery, and the red and black connectors of the output to illuminate the positive and negative poles of the daytime running light. Connect the yellow line of the controller to the positive pole of the headlight (or reading lamp). When the headlight (or reading lamp) is turned on, the brightness of the daytime running light is halved (darkened) to achieve the dimming function (yellow line) affect other applications).
Note:
After connecting the battery, the daytime running light switches on for approx. 15 seconds on and then off. This is a normal phenomenon (realize the delay function). Then you need to start the car. When the voltage reaches 13 V +, it starts to work!