Areas of application: _Effective sanding and removal of hard concrete surfaces coated with thin thermoplastic paint (e.g. dispersion, PU, acrylic). _Removal of formwork lugs _Grinding of epoxy resin coatings _Also ideal if a lot of removal is required. Technical data: Max. Permissible speed: 11,000 rpm. Tool diameter: 130 mm. Tool holder: 25 mm. Carrier height: 15.5 mm. Grit: 30/40. Grinding: dry grinding. Number of segments: 15 segments. Segment height: 6.6 mm. Can be used with: Festool RG 130, Protool RGP 130, no smearing. ! Due to the geometry of the diamond segments, thin old coatings are torn open before they can lubricate the diamond. This makes it possible to free coated concrete surfaces from the coating in one operation and at the same time grind mineral pure.