Wilhelm Roughing Discs Offset Stainless Steel Metal Steel Stainless Steel Sanding Discs for Cutting Grinder or Angle Grinder Wilhelm Velcro Sanding Discs Eccentric Sandpaper Sanding Discs 8 Hole Wilhelm Flap Discs for Wood Metal Steel Stainless Steel Sanding Mop Lamellar Disc INOX Wilhelm Cutting Discs Stainless Steel Metal Steel Stainless Steel Inox Sheet Flex Discs Extra Thin

Product features with a diameter of 125 mm

Cutting disc 125 mm

Areas of use: Aluminium, V2A, non-ferrous metal, steel, iron, sheet metal, stainless steel, thin-walled profiles, copper, brass, etc. Tested according to EN 12413 WA46SBF

Bore diameter: 22.23 mm. Disc thickness: 1.0 mm

Dimensions: 125 x 1.0 x 22.23 mm. Max. Rotation per minute: 12200. For maximum circumference speed 80.00 m/s. Suitable for all standard cutting and angle grinders with 22.2 mm attachment. Cut type: dry/fine. Not permitted for roughing. Please note safety instructions

Flap disc diameter 125 mm offset resin bonded available grains: 40/60/80/120 Suitable for all standard cutting and angle grinders with 22.23 mm holder

Flap disc, colour: blue: Zirconia corundum. Suitable for grinding e.g. Aluminium, steel, especially for stainless steel, V2A, V4A

Flap disc colour: brown: Normal corundum. Suitable for grinding e.g. Wood, metals (except stainless steel), plastics

Sanding discs resin-bonded attachment system: Velcro fine and groove-free sanding, diameter 125 mm, 8-hole punched. Depending on the grain thickness, you can coarse pre-sand or finely regrind high-quality grain size from K40 to K1200

Areas of application: almost universal use for wet and dry sanding on paints and varnishes, as well as on fillers, e.g. in drywall, wood and metal work, smoothing fillers, grinding primers in body processing, grinding plastic and leather, removing rust. For all standard 8-hole sanders or 125 mm sanding disc

Roughing disc 125 mm offset

Areas of use: Aluminium, V2A, non-ferrous metal, steel, iron, sheet metal, stainless steel, thin-walled profiles, copper, brass, etc. Tested according to EN 12413 WA24SBF

Bore diameter: 22.23 mm. Disc thickness: 1.0 mm. Dimensions: 125 x 6 x 22.23 mm. Max. Rotation per minute: 12200. For maximum circumference speed 80.00 m/s. Suitable for all standard cutting and angle grinders with 22.2 mm holder

Suitable for: Weld seam preparations deburring equalizing (including welds) corner and edge grinding