Feature

●6808-2RS (inner diameter = 40 mm, outer diameter = 52 mm, thickness = 7 mm)
●The bearings 6808-2rs are sealed on both sides to keep the lubricant in the bearing
●Made of chrome steel (GCr15), durability and resistance to deformation under high loads
●ABEC tolerance 1 (P0), Z2 noise level for most general purpose applications
●Static load capacity of 4180N and dynamic load rating of 4930N


Description

Note:
Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on both or individual sides of the warehouse). Suffix in stock only to distinguish between sealed and shield bearing type. This would not affect the use of our product.
Description:
Single row, pre-lubricated, normal accuracy. Deep groove ball bearings are among the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With low friction and high limit speed, ball bearings are cost-effective and require little maintenance. These low cost bearings are commonly used in areas with low Mohs hardness requirements. Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment and so on.
Selection guide:
Shields (designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (suffix RS/2RS) - Made of sheet steel reinforced (oil and liquid resistant). Lower limit speed than shield bearings.
Specification:
Model: 6808-2RS.
Gasket Type: Double Sealed
Inner ring / outer ring material: chrome steel (GCr15).
Cage material: stamped steel
Inner diameter (d): 40 mm.
Outer diameter (D): 52 mm.
Thickness (B): 7 mm.
Dynamic load capacity (Cr): 4930 N
Static Load Capacity (Cor): 4180N
Accuracy class: P0 (ABEC-1).
Noise level: Z2.
Number of packs: 4 pieces