NOTE: Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on BOTH or SINGLE side of the warehouse). The suffix on the bearing is only used to distinguish between sealed and shielded bearing type. This would not affect the use of our product.
Description:
Single row, pre-lubricated, normal accuracy.
Deep groove ball bearings are one of the most commonly used rolling bearings. They are used to absorb radial and axial loads in both directions.
With low friction and high limit speed, ball bearings are cost-effective and low maintenance.
Chrome steel (GCr15), made with heat treatment, offers high and uniform hardness, good wear resistance and high contact fatigue resistance.
Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment, etc.
Selection guide:
Shields (designation Suffix Z / ZZ) - High speed. Protect from dirt and dirt.
Sealed (designation suffix RS / 2RS) - Made of nitrile butadiene rubber reinforced with sheet steel (oil and liquid resistant). Lower limit speed as shield bearing. Technical data:
Model: 63802-2RS.
Seal Type: Double Sealed Inner Ring / Outer Ring Material: Chrome Steel (GCr15)
Cage material: punching steel and inner diameter (d): 15 mm.
Outer diameter (D): 24 mm.
Thickness (B): 7 mm.
Dynamic load rating (Cr): 1.65 kN
Static load capacity (cor): 1.08 kN.
Accuracy class: P0 (ABEC-1).
Noise level: Z1.
Number of packs: 1 piece