Feature

●Size: 6000RS (inner diameter = 10 mm, outer diameter = 26 mm, thickness = 8 mm)
●Sealed on both sides of the bearing to hold the lubricant. Suitable for complex environments
●Made of high carbon steel, durable and resistant to heavy loads.
●ABEC Tolerance 1 (P0), Z1 Noise Level for General Use
●Such as 6000-2RS / 180100. Pre-lubricated, easy to maintain


Description

Note:

Please refer to the picture and select the correct bearing type before placing your order (sealed or shielded on both or individual sides of the warehouse). Suffix in stock only to distinguish between sealed and shield bearing type. This would not affect the use of our product.


Description:

Deep groove ball bearings are among the most widely used rolling bearings. They are used to absorb radial and axial loads in both directions.
Suitable for all kinds of industrial equipment, micro motors, small rotary motors, office equipment and so on.
With low friction and high limit speed, our deep groove ball bearings are cost-effective and low maintenance.
These low cost bearings are commonly used in areas with low Mohs hardness requirements.
Single row, pre-lubricated, normal accuracy.


Selection guide:

Shields (designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil and liquid resistant). Lower limit speed than shield bearings.


Specification:

Model: 6000-2RS.
Sealed Type: Double Sealed
Material: high carbon steel
Heat treatment: quenching
Hardness: HRC50-55.
Cage material: stamped steel
Inner diameter (d): 10 mm.
Outer diameter (D): 26 mm.
Thickness (B): 8 mm.
Dynamic load capacity (Cr): 4.58 kN
Static Load Capacity (Cor): 1.98 kN
Accuracy class: P0 (ABEC-1).
Noise level: Z1.
Number of packs: 10 pieces.
Weight: 191 g