1. Check the degree of wear of the handbrake skin. In case of heavy wear, it is recommended to change the handbrake housing first. (Note: Handbrake pad, not foot brake pad)2. Install the handbrake cable and adjust the gap between the handbrake and brake drum as small as possible.3. Plug in the computer plug, open the door of the phone key and check whether the electronic handbrake module works normally (the second and third step must not be replaced).4. If the electronic handbrake template works normally, finally install the emergency release line.
Note:
1. Do not pull the emergency release line at any time, unless the handbrake template is damaged, cannot be removed, pull the emergency release line, and the handbrake computer can no longer be used after the "kaba" sound sound.
2. If some error codes cannot be deleted, drive a circle of approx. 5 to 10 kilometres, then go back, stop the fire, try again, and some error codes will be automatically deleted.