Feature

●Many uses: This double carbide tungsten cutter set can be used in many ways, for example, for engraving, carving, drilling on wood, glass, jade, bone, stone and other soft materials. It can also be used for polishing metal to remove rust on the surface.
●Made from high-quality carbide tungsten carbide: these drill sets are very durable and their service life is more than ten times the life of tools made of normal steel tools. They are made of premium carbide tungsten carbide, which is harder than normal metals.
●Double cut design for efficient work: the grinding head is designed as a double cutter. The sawdust is smaller. So your cutting work will be faster and smoother, even polishing metal.
●Universal compatibility with multifunctional tool: the shaft diameter is 3 mm and is compatible with most multi-grinder tools, for example Dremal 3000, Parkside PFBS 160 C3. Make sure your multi-tool accepts cutter with a shank diameter of 3 mm.
●Note: This cutter set is intended for soft material. You can also use it to polish the rust on the metal. But do not cut the hard metal. Be careful: wear the goggles when drilling work.


Description

EASERIA is a German group in Berlin that can provide you with high-quality and useful tools that make your life easier.

Here is our carbide burr set with double cut for your DIY woodworking, drilling, engraving, metal polishing. These cutters are made of tungsten carbide steel, one of the toughest steels.

What is the difference between our carbide burr set and others?

1. Compared to others, our carbide router bit sets feature sharp cutting edges. It can cut wood, plastic and stone easily and smoothly.

2. These cutters can be bent vibration-free

3. Very long service life.

Multifunctional carbide cutter set.

This set contains 10 different cutter shapes for drilling, engraving, grinding, polishing and removing sharp edges, suitable for woodworking, stone carving, metal polishing and grinding.

Features:

1. Shank Diameter: 3mm

2. Cutting diameter: 6 mm.

3. Total Length: 45-51mm

4. Shaft length: 35 mm.

The shape of the heads:

1. Oval.

2. sphere

3. Flame.

4. Sharpener tree

5. Pointed cone

6. Inverted cone

7. Nose or ball nose.

8. Cylinder with end cut.

9. Round or spherical cone

10. Cylinder with round head or ball head.

Compatible with multi-tools:

1. Dremel

2. PARKSIDE

3. Tacklife

4. Proxxon

5. And more that can hold a shaft diameter of 3 mm

Safety instructions:

The working speeds should be 6,000 rpm to 40,000 rpm.

1. The cutter must be held firmly in the multi-tool.

2. The cutter can be moved evenly from right to left. Do not move the cutter back and forth like a grinding wheel.