Feature

●Size – cutting diameter: 5.5 mm/0.217 inches; accuracy: H7; cutting flute length: 15 mm/0.59 inches; shaft diameter: 5.4 mm/0.21 inches; 90 mm/3.54 inches; cutting direction: right hand
●Material - Carbide C1/K30 is a tungsten cobalt carbide with a medium cobalt content of 6%, high hardness, toughness, abrasion resistance, resistance to heat and adhesion. The carbide can be used at higher speeds than high-speed steel.
●Features - The straight reamers offer the possibility of chips collecting in the flutes when cutting. Ideal for many applications in flat cuts. Can be used for passage holes or holes without interruption, such as keyways.
●Applications - Versatile use for machining and drilling. Designed for precise grating in stainless steel, aluminium, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc. Ideal for light cuts, repairs or enlarging holes.
●Notes - For all types of machines, such as screwing, lathes, drilling presses and manufacturing centers. Always keep the reamers clean and use with machine oil for a long service life. They should be stored in a high quality tool holder.


Description

Carbide C1/K30 is a tungsten cobalt carbide with a medium cobalt content of 6%, high hardness, toughness, abrasion resistance, resistance to heat and adhesion. The carbide can be used at higher speeds than high-speed steel.

The straight reamers offer the possibility of chips collecting in the flutes when cutting. Ideal for many applications in flat cuts. Can be used for passage holes or holes without interruption, such as keyways. The base substrate is designed without coatings and intended for general use.

Versatile use for machining and drilling. Designed for precise grating in stainless steel, aluminium, cast iron, copper, alloy steel, die steel, tool steel, plastic, wood, etc. Ideal for light cuts, repairs or enlarging holes.

Can be used for all types of machines, such as screwdrivers, lathes, drilling presses and manufacturing centers. The reamers must always be kept clean and lubricated with machine oil to ensure they last a long time.

Note: The tool is to be held in a high quality tool holder so that the reamer does not slip at high speeds. Suitable for a wide range of mounting systems.