Feature(may vary by option.)
●★ Clamping reamer size --- Cutting diameter: 5 mm / 0.2 inches; flute length: 24 mm / 0.94 inches; total length: 83 mm / 3.27 inches; tolerance: H7; flute type: 6 straight flutes
●★ Wide Applications --- For light cuts, repairs, removal or simply to enlarge holes. The thin metal layer on the surface of the machined holes is cut or removed to improve the accuracy of the hole and reduce surface roughness.
●★ Straight flutes --- With straight ground tools, the chips collect in the blades. The universal round shaft can be used in many mounting systems.
●★ High Speed Steel --- The chuck reamers made of high-speed steel are tough and wear-resistant. Only the base substrate without additional coatings, ideal for general purpose applications.
●★ Useful Notes --- Reamers are equipped with one or more teeth. The holes made with the reamer are precise in size and shape. Precision grating for stainless steel, aluminum, alloy steel, cast iron, copper, tool steel, plastic and wood
[14mm]
[4mm]
[13mm]
[5mm]
[7mm]
[8mm]
Description
Features:
* Cutting diameter: 5 mm / 0.2 inches.
* Flute length: 24 mm / 0.94 inches.
* Total length: 83 mm / 3.27 inches.
* Tolerance: H7
* Flute type: 6 straight flutes.
* Material: High Speed Steel (HSS)
What is included:
* 1 x reamer clamping.
APPLICATIONS AND FEATURES:
--- For light cuts, repair work, removal or simply to enlarge holes. Used to cut or remove the thin metal layer on the surface of machined holes, mainly to improve hole accuracy and reduce surface roughness. Precision cutter for stainless steel, aluminium, alloy steel, cast iron, copper, tool steel, plastic and wood, etc. Use on lathes, drills and screwdrivers.
--- The chuck reamers made of high-speed steel are tough and wear-resistant. Only the base substrate without additional coatings, ideal for general purpose applications. With straight ground tools, the chips collect in the blades. The universal round shaft can be used in many mounting systems.
Useful Notes:
--- Reamers are equipped with one or more teeth. The holes machined with a reamer have an accurate size and shape. Cutting oil is used for lubrication, cooling and non-stick effect. For higher quality holes and a longer life of the reamer, a suitable cutting oil should be added. The cutting angle should be 90 degrees vertical and stable.