Feature

●Size - total length: 200 mm/8 inches; shaft diameter: 3 mm/0.12 inches; head diameter: 6 mm/0.24 inches; head thickness: 4 mm/0.16 inches
●FEATURE - The ejector stamp is long, straight, with a non-cutting surface and has a round tip. Not easy to bend or deform when working
●Material - Made from 65Mn manganese steel with tempered surface treatment and HRC: 48-52rc. This ejector pin stamp has the properties of high elasticity limit, high strength, high hardening and good workability
●PRACTICAL PARTS - The straight ejector pin made of steel, also called punching rod or punch needle is an essential metal part of punching tools in mechanical tools.
●Application - Suitable for working in high temperature environments. Used in locksmiths, moulding, leather processing, machine maintenance and processing industries. Eject or press the plastic parts when injection moulding


Description

Description:

1. The ejector pin driver is long, straight, with non-chipping surface and has a round tip. Not easy to bend or deform when working.
2. Manufactured from 65Mn manganese steel with quenched and tempered surface treatment and HRC: 48-52rc. This ejector has the properties of a high elasticity limit, high strength, high hardenability and good workability.
3. The steel straight ejector pin can also be called a punch rod or punch needle, which is an essential metal part on the punching tool in mechanical tools.
4. Suitable for working in high temperature operating environments. Application in assemblers, mold making, leather crafts, machine maintenance and processing industries. Throw or slide the plastic parts when plastic injection punching.


Specification:

Colour: silver tone
HRC: 48-52RC
Material: 65Mn SteelSurface Treatment: Quenched; Hardened
Shaft diameter: 3 mm/0.12 inches.
Head diameter: 6 mm / 0.24 inches.
Head thickness: 4 mm / 0.16 inches.
Total length: 200 mm / 8 inches.

Package contents:
5 x ejector pin drivers