The power supply unit LED PowerSupply 160-12 in DIN rail housing (4 TE) supplies your LED bulbs with a DC voltage of 12 V DC and a rated power of 160 W. To compensate for line losses, the output voltage can be raised to 14.25 V on a rotary switch in 0.25 V increments. Three LEDs signal operation and partial or full load operation. The maximum efficiency is 93%, with an efficiency of over 90% being achieved in all load operations from 25%. The efficiency exceeds the requirements of the "80Plus Silver" certificate. The power consumption in standby is typ. 0.1 W. The power supplies can be operated in parallel for larger loads. The devices detect the parallel connection and divide the load symmetrically among each other. The use of high-quality components increases the life of the device and also reduces the typical humming noise caused by dimming LEDs in the power supply. The DIN rail unit also meets all requirements of the important lamp standards for bulbs according to IEC 61347-1 and 61347-2-13. It is therefore suitable for supplying all dimmable and non-dimmable lamps: LED bulbs, fluorescent lamps, halogen lamps and other conventional lamps. In addition, the device has built-in short circuit protection, overload protection and over temperature protection. All protection functions are self-healing, i.e. when the cause is eliminated, the power supply will restart and provide the output power. The Enertex LED PowerSupply 160 with its unique features is the optimal solution for LED power supply in your sub-distributor.