Do you want to give your car a new look or exchange the advertising message? To do this, the old film must be removed first. Especially if this is already faded and cracked due to weather and UV radiation, peeling off can become a real test of patience. Often small pieces of film and adhesive residue are left on the car paint and must be removed with sharp badge scrapers or aggressive detergents. With our foil eraser, on the other hand, you can remove car film without leaving any residue.
The rubber eraser plate is equipped with a thread (M8 x 1.25). An adapter with 6mm shank (included) can be attached to it. This makes the badge remover suitable for most standard drills and cordless screwdrivers.
Before you start removing the car film, you should test the adhesive residue remover in an invisible place to ensure that the surface is not damaged during application. The badge eraser is suitable for most metal, paint and glass surfaces.
First, the area to be erased should be cleaned of coarse dirt. Then the eraser is guided over the adhesive film with light pressure from one side until all residues are removed. For best results, a speed between 1,500 and 3,000 rpm is recommended, but a maximum of 4,000 rpm. The stop payline indicates when the sticker remover needs to be replaced.
The foil eraser is the ideal tool if you want to completely remove stickers, badges, adhesive weights and films from cars, motorcycles, RVs, trailers, boats, trucks, etc. without damaging the surface of your vehicle.