Feature

●Cable lugs type A-M are made of electrolytic copper tube (SE-Cu according to DIN EN 13600). We recommend using pin crimping our press connectors.
●All crimping cable lugs have been annealed again after mechanical processing to ensure optimal crimping.
●The cable connectors all have a viewing hole that allows the correct insertion of the conductor. Each crimp terminal has the following features: - Cembre company logo - product name - conductor cross section (mm2)
●Press cable lugs for making safe electrical connections in electrical installation, e.g. in the home, garden and garage, on the car, truck, motorcycle, bicycle
●Box contents: 10 pieces of pipe cable


Description

Cable lugs type A-M are made of electrolytic copper tube (SE-Cu according to DIN EN 13600).

The pipe wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and extension of the conductor.

Our cable lugs are annealed to ensure optimal stretchability, this is absolutely necessary as the terminals must withstand severe deformation and the usual twisting of the tab during use.

Even with vibrations and vibrations, the connectors must ensure reliable contact.

Under these circumstances, hardness plays a crucial role in preventing breakage and cracking.

The viewing hole ensures the correct insertion of the conductor.

The sleeve length has been chosen so large to ensure easy and correct positioning between the press inserts during pressing.

All Cembre tubular cable lugs are equipped with a safety code system, e.g. A 24 (= 120 mm²).

When pressing with the hexagonal press inserts ME, the same code (A 24) is pressed by the press insert into the hexagonal surface of the pressing point. With a subsequent visual inspection, a simple check is possible and confusion is excluded.

Cable lugs are electrolytically tin-plated to prevent oxidation. Our technicians are available for further information