Make Noise modDemix is an extensive module for modular synthesizers in Eurorack format. It offers two identical modulator circuits, which can be operated together or independently for the following applications: Ring Modulation, VCA, Mixer Functions, Signal Multiplications, Voltage Controlled Polarization, Attenuation and much more. The individual controls of the module therefore have different functions depending on the insertion. Make Noise modDemix at a glance: a distinctive modulator circuit is deactivated as soon as less than zero volts are present as a carrier signal, which makes modDemix also available as a VCA. The STRENGTH controller combines two functions: If no signal is connected to the STRENGTH CV IN, this works as a level controller with connected STRENGTH CV IN signal, the STRENGTH ReTH Reth signal acts As a ffffhe which regulates the modulation intensity. Both circuits feed a summer, which allows the module to also be used as a voltage-controlled mixer. AUXiliary IN allows the cascading of several modDemix and/or Optomix which allows larger mixtures to be realized. Audio signals can be greased with a uniquely warm sounding distortion that you would otherwise see from any other VCA or ring modulator There are A total of eight LEDs housed in the narrow 6HP module, works well in use with MATHS and Optomix, MS ID: SYN0005053-000, manufacturer: Make Noise, TE / HP: 6, depth (mm): 24, + 12 V (mA): 30, - 12 V (mA): 30, modulation: yes, other effects: yes. Buttons. instruminstruminstruminstruminstruminstruminstrumthesizer, effect modules