Feature(may vary by option.)
●Self-closing hinged lid: The switch box socket with self-closing hinged lid is waterproof and dustproof, so you can use it safely. 2 x Schuko sockets 230 V 16 A, blue sockets ABL IP54; 1 x CEE sockets 400 V, 16 A, 5 pin, red sockets ABL IP44; 2 x 1-pin LS C16 A circuit breaker; 1 x 3-pin LS C16 A circuit breaker. Rated Working Voltage: AC 230V 400V; Output Socket Pin Number: 3 Pin / 5 Pin
●High-quality ABS material: the panel wall distributor chooses ABS material with high impact resistance, good weather resistance and strong wear resistance. In addition, the plastic housing protects against water and dirt splashes.
●IP65 rating: protection class IP65 means dustproof and protected from moisture, water, rain, snow, oil, etc. It keeps all your electrical devices dry, also provides even more safety on construction sites.
●Easy installation: the outdoor power distributor has a wall design and complete mounting accessories that can be installed anywhere. In addition, the power distributor can be quickly attached to the wall thanks to multiple mounting holes on the housing.
●Wide application: the compact small distribution wall is designed for construction sites and continuous outdoor use. It is incredibly robust and suitable for petroleum, mechanical processing, transportation, airports and other electrical applications.
[6x230V]
[4x230V]
[2x230V]
Description
Standards:
IEC-439-1《Low Voltage Switchgear and Control Units
Technical requirements:
General working conditions
The devices specified in this specification are arranged indoors and outdoors and can be operated safely under the following conditions.
Pollution level: level III.
Height: no more than 1000 m.
Maximum monthly average relative humidity: 95% (6°C).
Maximum ambient temperature: +40°C.
Minimum ambient temperature: -35°C.
Maximum ambient temperature. The protection class of the housing of the maintenance box must not be lower than IP65. In accordance with the requirements of IEC309, the maintenance box installed on the outer wall must be protected from bumps, sand and direct sunlight. The degree of protection of the interior maintenance box shell must not be lower than IP54.