Description
Uneven tiles not only affect the appearance, but also pose potential safety risks. Our tile leveling pliers can help you solve this problem. Made of stainless steel and PVC, the tile leveling pliers are durable and you dont have to worry about breakage. Lever design and 6-speed speed control can save your energy and make your operation more comfortable and efficient. This makes the wall and floor of your room smooth.
Details
NON-SLIP HANDLE It is equipped with an ergonomic handle without burr edges. The groove on the handle can increase friction, prevent hands from slipping and also reduce the pain of hands due to long working hours.
Thickened inlay: the inlay of this tile levelling pliers has been thickened by 3 mm/0.12 inches. The solid structure ensures that the operation is always more stable.
Protective Cover There is a plastic protective cover at the bottom of the pliers, which can effectively prevent the bottom plate from being scratched during operation.
Nut The pliers are equipped with a nut on the top and a spring back design, which can help you better operate and install the product.
Tail hanging hole: the tail of the product is equipped with a hanging hole, which is convenient for you to hang it on the wall for space-saving and easy access.
Application:
This tile leveling pliers is ideal for laying floor/wall tiles and is suitable for living room, bathroom, office, etc. It is ideal for professionals and DIY enthusiasts who want to tile the wall and floor.
How to use the application
1. Place the base under the tile.
2. Square the tile and insert tile wedges. One tile requires four sets of wedges.
3. Use a rubber hammer to beat the tiles flat.
4. Press with pliers.
5. Clean the gap with a blade between the cement.
6. Tap through hammer or step from the side after 24 hours when the ceramic tile adhesive or cement dries out.
7. The disposable base is left under the tile, and the wedge can be reused.
Specifications
Colour: red.
Style: Modern
Gear adjustment: 6.
Material: stainless steel and PVC.
Power Source: Hand Powered
Applicable tiles: wall or floor
Thickness of the inlay: 3 mm/0.12 inch.
Net weight: 0.35 kg/0.77 lbs.
Gross weight: 0.5 kg/1.1 lbs.
Total size: 23*18*4.3cm/9*7*1.7inch
Package size: 24*19*5.5cm/9.45*7.48*2.17inch
Package includes:
1 x tile levelling pliers.
Notes:
1. Please note that the package of these tile levelling pliers contains only one pliers, not base and wedge.
2. Before laying tiles, please remember to wipe some cement from the edge of the tiles. If there is too much cement in the gap between the tiles, it is recommended to use tools such as a blade for cleaning.
3. Please do not fill the ceramic tile with cement, which prevents the cement from being wrapped by the clip after the clip has been placed. The solidification affects the removal of the clip.
4. After construction, please clean the cement in the brick joint and next to the base in time. If the cement completely covers the base, it will not be easy to separate the base from the ground when the cement is dry. When the base is separated from the middle part, part of the base remains in the brick joint, which is difficult to clean.
5. Please make sure the cement is fully cured before removing disposable spacers. We usually recommend waiting around the clock.
6. Please note that the base must be used together with the wedge, and the base cannot be reused, and please do not disassemble it after it is repaired.
We recommend 4 wedges for each tile and 6 wedges for larger tiles.
8. Please do not use excessive force when installing tile spacers with tile pliers, which can cause the spacer base to break easily.
9. Please allow slight colour difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind this before ordering.