Custom your own personalised new Jimmy Page Gibson Les Paul Wiring Harness Bourns 500 K push/pull pot 920D Custom Shop Wired Gibson or Epiphone belt system for use with all tips shelf components are utilized. Its designed to easily fit in your guitar drop your tone. Arrange in your body Pickups and a base to soldering and youre good to go. Supplied with four burns 4-500 K potentiometers, two orange drop .047UF Ceramic waffle capacitors, system 3 Way Short Straight toggle switch and Switchcraft jack socket Gavitt Vintage Cloth strands of wire. This harness is suitable for retrofitting USA Les Paul type guitars. Need to be model Les Paul type guitars the imported pot holes easily.Kit contains: Burns 500 K push/pull potentiometers Switchcraft Short Straight 3 Way Toggle Switchcraft Output Jack Orange Ceramic waffle/Drop .047uf capacitor Gavitt Vintage Style Towel Wirep push/pull function Bridge Volume: splits Bridge Pickup into single coil neck volume: splits neck pickup into single coil bridge tone: The bridge and neck pickups out of phase (both pickups must be selected) neck: the bridge and pickups in the series (both pickups must be selected) Please note: This kit is suitable for Gibson Les Paul has long been shaft pots (Gibson USA Standard, etc and Gibson LPs made after 1977). In addition, burns pots has a 3/20.3 cm (in the tip of the sleeve), the majority of made in the USA guitars are drilled but your guitar guitars tend to be not imported.