[3 AXIS]
Parameters of the CNC engraving machine:
X, Y, Z Working area: 600 (Y) x 390 (X) x 120 (Z) mm
External dimensions: 865 x 680 x 570 mm (L x W x H).
Table size: 770(Y)x 490(X)mm
Lathe structure: 6061/6063 aluminium alloy.
Max. Feeding height: ≤ 100 mm.
Drive unit:
X-axis ---1605 ball screws
Y-axis ---1605 ball screws
Z-axis ---1204 ball screws
Sliding unit:
X-axis: high-intensity chromeplate shaft.
Y-axis: high-intensity chromeplate shaft.
Z axis --- High-intensity chromeplate shaft.
Stepper motor: 57 two-phase 3A 150N.cm.
Spindle motor:
Tips:
1. The spindle motor must be connected to the VFD.
2. It cannot be connected directly to the supply voltage (AC220V).
External dimensions: 65 x 158 mm.
Material: 304 stainless steel, copper spiral, water jacket made of die-cast aluminium pipes.
Volts, current, power: AC220/50Hz, 5A, 1.5KW VFD.
Spindle speed: 24000 rpm.
Maximum operating frequency: 60Hz.
Main Axis Collet:ER11 Collet (Standard Configuration:6mm)
Nut Model: ER11-A
Cooling: water cooling
Speed mode: by adjusting the VFD output voltage and operating frequency from 0-24000 rpm.
Lubrication: lubricated by high grease.
Repeatability: 0.05 mm.
Spindle precision: radial impact sharpness 0.03 mm.
Carving Instructions: G-Code
Communication interface: USB connection to computer
Software environment: Windows XP/Win7 32BITS
Maximum idle speed: 1500 mm/min.
Working speed: 50-1500 mm/min.
Control box parameters:
Operating voltage: AC 220 V.
Control unit: toroidal transformer + PWM power supply module + stepper motor drive TB6560.
Computer port: USB port
Command code: G code
Protection: emergency stop button.