Feature(may vary by option.)

●★ UPGRADED STRENGTH & RELIABLE PROTECTION Our bubble wrap provides enhanced cushioning and a maximum load capacity of 200 Its nine-layer coextrusion film (HDPE+PA+20% nylon) ensures superior toughness.
●★Easy to adjust with length: check valve design, each column sleeve is independent and each column fails, does not affect other columns inflated. You can adjust the upholstery film to any length by cutting off the roll and re-adjusting the length before cutting without wasting a film. Fill all cavities for transport.
●★DIMENSION:50m x 25cm for the whole roll, 21cm wide after inflation, thickness is approx. 50 microns It is not pre-filled with air. It can be filled with air pump, bicycle pump, air compressor or electric air pump. A free simple hand pump is included, not for long-term use.
●★ Fast inflation: 1. Clamp the end of the wrap piece to your desired length. 2. Pumping air. 3. Try the length. Cut the inflated piece or adjust the length and inflate it again. 80%-85% inflation will be fine, no need to inflate it too much. The columns retain air for over 2 months. Cannot deflate and inflate again.
●★ Boost your business: ultra-light packaging protection, less storage space and lower cost. Suitable for heavy packaging, shipping fragile and fragile items. Better Packaging Materials Alternative to packing peanuts, foam and kraft paper and traditional bubble wrap.

[50 m]

[9 13 & 16 x164ft]

Description

Pai König packaging products co., Ltd has come with air cushion
Packaging system since 2014, profession in research, development,
Production of bubble wrap. We have won ISO 9001 and ISO
Management System Certifications 14001

How to inflate:
Step 1: Locate the air inlet area first. Check the right side of
Bag, the inflation hole is aligned with the right end of the horizontal.
Arrows pointing to the left. Rub the two layers with your fingers.
Find the hole.

Step 2: Insert the pump tip and pump several times. Put your
Finger over the hole while inflating it to avoid wrinkles stop.
Air pressure in one part of the section.