Feature(may vary by option.)
●Durable two-wire heating cable, ready to connect, included is a 3 m long connection cable (PTC conductor); two-wire allows the power supply only from one end of the heating circuit, so that it is easy to install
●Very resilient: manufactured in accordance with the VDE standard – DINEN60335-2-96, DIN EN60335-1 and DIN EN50366; approval: VDE (heat conductor)
●Especially suitable for niches, corners with heavy room shapes, such as conservatories, stairs, bathrooms, semi-circular rooms, etc.; can be laid under all floor coverings such as tiles, stone, wood, laminate, carpet, cork, PVC, etc
●Installation flexibility: can be laid with a loop distance of 5-12 cm; which allows the heating output per m² to be adjusted to the needs; the loop distance of min. 5 cm must not be undercut
●The range of applications ranges from; room heating, bathroom heating, wall heating, floor heating, ceiling heating and patio heating, or as additional heating in the garden shed, garage and cellar
[24 | 0m]
Description
This Mi-Heat heating cable can be used wherever no heating mat can be used due to unconventional room shapes such as
- Living area with difficult shapes or as an addition to underfloor heating mats.
- conservatories
- Bathroom
- hallway
- stairs
- under tiles
- niches
- Corners
- columns
- steps
- pedestals
- Narrow areas
- semicircular rooms
- Ready assembled, with 3 m PTC connection cable on only one side.
- Can be laid under all floor coverings such as tiles, stone, wood, laminate, carpet, cork, PVC, etc.
- Completely maintenance- and wear-free.
- Ideal for rooms of a wide range of designs.
- Each Mi-Heat heating cable is subject to strict quality and functional tests.
- Operating voltage: 230 V.
- Max. Power consumption: 460 watts.
- Heated area: 3.0 - 4.8 m² depending on the distance between the loops.
- Cable diameter: 4 mm.
- Max. Operating temperature: 80°C.
- Connection cable length: 3.0 m.
- IP protection class: IP67.
- 1 x Mi-Heat Twin heating cable 38 m.
- 1 x assembly instructions.
Additional product information
The Mi-Heat twin heating cable can be laid with a loop distance of 5-12 cm. This flexible installation option allows you to adjust the heating output per m² to your needs. So it is also possible to form certain heating zones. For example, in front of the sink or on outer walls, the heating cable is laid with a smaller loop distance. The heating cable can be attached using mounting tape, tape, hot glue or mounting adhesive. It is important that the loop distance of min. 5 cm.